Phonic PAA3 Specifications

Input/Output

• Microphone: Built-in miniature omni direction condenser microphone
• Line: XLR jacks for line input and output
• Data Port:USB 1.1 interface

  Display

• 160X160 LCD screen with contrast adjustment and back light
• SPL, dBu, dBV, Voltage: Bar graph and digit display
• RTA: 31-band, 0.5dB resolution Center frequencies ISO standard from 20Hz to 20KHz

  Measurement Range

• SPL (Microphone input): 30 to 130 dB SPL
• dBu (Line input): -50 to +40 dBu
• dBV (Line Input): -52 to +38 dBV
• Voltage (Line Input): 5 mV to 80 V

  Setting

• Weighting: A, C or Flat
• Peak hold: ON/OFF
• Maximum Level Display: RESET
• Response Time: 35 ms, 125 ms, 250 ms, 1 sec

  Other Functions

• RT60: Reverberation time display, up to 30 seconds
• Memory: 10 RTA+ 6 average calculation
• Average Calculation: For 10 RTA memories
• EQ Setting Value Display: 31-band
• Phase Checker: Through polarity signal
• Transmission: Simultaneous operation with PC or laptop through USB port

  Noise Generator (Based on 6VDC power source)

• Pink noise: Balanced output, -10 dBu
• 1K Hz Signal: Balanced output, -10 dBu
• Polarity Signal: Balanced output, -10 dBu

  Power Source

• 4 x AA batteries
• Battery Life: Up to 7 hours with alkaline batteries)
• External 6 VDC adapter

  Dimensions (HxWxD)

• 5.7 x 3.26 x 1.55 inches (5.7144.95 x 82.95 x 39.42 mm)

  Weight (with batteries)

• 0.78 lbs. (354 g)

Phonic PAA3 Features:

• Palm-sized, lightweight audio analyzer for all sound engineers
• 31-band spectrum analyzer, RT60, SPL meter, and more
• Easy operation with built-in microphone and generator
• EQ setting calculation offers advice for boosting and cutting at the touch of a button
• USB interface allows real-time computer operation
• Seven hours of continuous operation with four AA batteries

• 31-band Real Time Spectrum Analyzer allows Db analysis of offending frequencies
• 31-band EQ setting value display (Boost/Cut)
• RT60 measurement
• Built-in calibrated measurement microphone
• Phase checker
• Noise generator with pink noise, 1kHz and polarity test signal, balanced output
• Memory and average calculation function
• SPL meter calibration through sound level calibrator
• Sound Pressure Level Meter from 30 dB~130 dB
• Line signal measurement display in dBu, dBV, or Volts (AC)
• SPL meter and level meter have three level range selections
• Maximum level, Peak hold displays
• XLR input and output sockets
• USB interface for desktop software control
• Audio test signal CD and supporting software
• Three power modes: (1) Power Save (2) On (3) Off
• Operates seven hours with four AA batteries
• AC power adapter included