Phonic PAA2 Specifications

Input/Output

• Microphone: Built-in miniature omni direction condenser microphone
• Line: XLR jacks for line input and output
• Data Port: 3.5mm mini stereo phone jack for RS232

  Display

• 160X160 LCD screen with contrast adjustment and back light
• SPL, dBu, dBV, Voltage: Bar graph and digit display
• RTA: 31-band, 0.5dB resolution Center frequencies ISO standard from 20Hz to 20KHz

  Measurement Range

• SPL (Microphone input): 30 to 130 dB SPL
• dBu (Line input): -50 to +40 dBu
• dBV (Line Input): -52 to +38 dBV
• Voltage (Line Input): 5 mV to 80 V

  Setting

• Weighting: A, C or Flat
• Peak Hold: ON/OFF
• Maximum Level Display: RESET
• Response Time: 35 ms, 125 ms, 250 ms, 1 sec

  Other Functions

• Memory: 10 RTA+ 6 average calculation
• Average Calculation: For 10 RTA
• EQ Setting Value Display: 31-band
• Phase Checker: Through polarity signal
• Transimission: Simultaneous operation with PC or laptop through RS-232

  Noise Generator (Based on 6VDC power source)

• Pink Noise: Balanced output, -10dBu
• 1K Hz Signal: Balanced output, -10dBu
• Polarity: Signal Balanced output, -10dBu

  Power Source

• 4 x AA batteries
• Battery Life: 4hrs with alkaline battery
• Or External 6 VDC adapter

  Dimensions (HxWxD)

• 5.7"X3.26"X1.55" (144.95 x 82.95 x 39.42mm)

  Weight (with batteries)

• 0.74 lbs. (340 g)

Phonic PAA2 Features:

• Personal Audio Assistant
• Palm Size Audio Analyzer
• 31-band Real Time Spectrum Analyzer
• Built-in calibrated measurement microphone
• Sound Pressure Level Meter from 30dB~130dB
• Line signal measurement display in dBu, dBV, or Voltage
• A, C weighting or flat
• 3 level range selection for dB SPL and line signal
• Line signal measuring range:
  • dBu = -50 ~ +40dBu
  • dBV= -52 ~ +38dBV
  • Volts = 5mV ~ +80V
• Maximum level display
• Peak hold display
• 4 standard response times:
  • 35ms
  • 125ms (F)
  • 250ms (M)
  • 1sec (S)
• 10 memories for measurement and 6 for average calculation
• 31-band EQ setting level display (boost/cut)
• 160 x 160 graphic display with back light and contrast adjustment
• Phase checker
• SPL meter Calibration through sound level calibrator (eg: B & K Type 4231)
• Noise generator with pink noise, 1K Hz and polarity test signal, balanced output
• Low power consumption for over 4 hours continuous operation with 4 AA size alkaline batteries
  (Adapter power supply operation available. When power is used from adapter, it automatically cuts off battery power)
• 3 power modes:
  (1) Power saving mode: Auto Off- when none of the buttons has been pressed for 15 minutes
  (2) Manual Off
  (3) Off
• XLR input and output sockets
• RS232 communication port, for simultaneous operation through laptop or PC
• Includes CD-ROM with audio test signals and software for PC